How to Replace Battery for Your VICTGOAL Bike Helmet ?

When you are doing night cycling, you need to ensure your safety as you do the job – and a helmet is very important for that purpose. So it is very important to keep the rear light available for your helmet.

The good news is that getting replacement parts for a helmet is easy, so here are some steps you can take to fix the battery.

Build-in Regulator Rear Light (VA110)

1. Take off the paddings behind the rear light
2. Unscrew & remove the rear light
3. Unscrew the cover
4. Remove circuit;
5. Push battery out with non-sharp tool at the back of circuit 
6. Replace new battery (CR 2032 )

Triangle Rear Light (VA103,VA119.,etc)

1. Take off the rear light from the helmet;
2. Remove cover with non-sharp tool
3. Remove circuit;
4. Push battery out with non-sharp tool at the back of circuit 
5. Replace new battery (CR1632 )

Diamond Rear Light （VA105,VA117）

1. Take off the rear light from the helmet;
2. Remove cover with non-sharp tool
3. Remove circuit;
4. Push battery out with non-sharp tool at the back of circuit 
5. Replace new battery (CR 1032 )

It is easy to change the battery for our VICTGOAL Bike Helmet,please share this post to your friend if needed.

If you need further help, please leave your message to us.  

cs@victgoal.com

Thank you